JAZ Messageboard
he solution for your problems

Take part in our forum and we will attend to your inquiries.

Flexible Abrasives

Mod. DNA Industrial Line Abrasive Nylon 6-12
Mod. DNA Industrial Line Abrasive Nylon 6-12
Technical Information

  • Filaments impregnated with Silicon Carbide abrasive grains allow the brush to maintain a high cut rate while producing a consistent finish throughout the life of the brush.
  • Filaments flex to all angles, and permits them to deburr and finish highly contoured parts.
  • Nylon brushes are ideal when it is important that surface measures are not affected by the brushing process. Suitable for wet and dry applications.
  • Although coolants and lubrication may allow the use of higher speeds than initially recommended, these R.P.M. must never be exceeded.
  • Exclusive design and patented multifitting thread in two different versions; one is valid for M14 and 5/8-11 attachments; the other is valid for M10 x 1,5 and M10 x 1,25 systems.The new design is also extended to single threads. It allows an easier attachment and increases resistance resulting in more safety .
Applications

  • Deburring of turbine blades and removing carbon encrustation from engines.
  • Cleaning of dies, steel and cast iron pieces.
  • Deburring of cylindrical parts, steering gear cases and control pistons in the automotive industry.
  • Deburring of edges on aluminium extrusions, fabricated metals, powdered metals…
Sectors

Aeronautics, Car Industry, Electrical Industry, Wood Industry.
Order example:
TNA 1102 M14

  • Model: TNA
  • Article Code: 1102
  • Arbor Hole: M14
Model Diameter
mm/"
Face Width
mm/" 		Trim Length
mm/" 		Arbor Hole GRIT R.P.M.
120
Coarse		 180
Medium		 320
Fine		 Recom. Max.
DNA
150
6"
13
1/2"
27
1.1/16"
(I)
13-16-20-22-26-30-50mm
1/2"-5/8"-3/4"-7/8"-1"-1.3/16"-2" 		1511 1512 1513 2.800 6.500
150
6"
28
1.1/8"
27
1.1/16"
1521 1522 1523 2.800 6.500
175
7"
16
5/8"
40
1.9/16"
1711 1712 1713 2.400 6.500
175
7"
29
5/8"
40
1.9/16"
1721 1722 1723 2.400 6.500
200
8"
16
5/8"
40
1.9/16"
2011 2012 2013 2.100 4.500
200
8"
29
5/8"
40
1.9/16"
2021 2022 2033 2.100 4.500
250
10"
16
5/8"
65
2.5"
2511 2512 2513 1.500 3.000
250
10"
29
5/8"
65
2.5"
2521 2522 2523 1.500 3.000
TNA
110
4.3/8"
 
35
1.3/8"
22-M14-W5/8" (2) 1101 1102 1103 3.800 8.500
BNA
25
1"
 
30
1.31/8"
6mm (3)   2502   4.500 20.000
LNA
20
3/4"
    W1/4"-NPT 1/8"   2012    
25
1"
W1/2"-NPT 1/4" 2512
40
1.9/16"
4012
50
2"
5012
(1) DNA Brushes are provided with multi-fitting adaptor (code 99).
(2) R88 Code: Multifitting for M14 and 5/8”-11; R77 Code: for M10 x 1,5 and M10 x 1,25.
(3) Shank of 6 mm.
Mod. DNA Industrial Line Abrasive Nylon 6-12
Polígono Ind. Azitain - P.O. BOX 50   20600 EIBAR (SPAIN)    -   Tfno: (34) 943 12 06 00 - 943 70 70 22    Fax.: (34) 943 12 17 04       jaz@jaz.es